UnBoxing of the July 2017 Maker Box. This is an ongoing monthly presentation of the unboxing of the monthly Maker Box. We do this for those who are curious about the Maker Box and want to know what it might contain and if it is worth it to them. If you would like to get your own Maker Box (and support the channel at the same time) you can use this link: https://makerbox.cratejoy.com/refer/Glenn-TQTYLWEM Just Some Fun Reading: Jelly Belly Sugar Free Jelly Beans (Read The Reviews) http://amzn.to/2f1jENh Seems Amazon has removed the Haribo Sugar Free Gummy Bears from their site. 🙁 Where we can be
The Bi-Weekly 3D Printing Community Hangout featuring various personalities from the YouTube printing community. This week we will be talking about File Management – Storing files and naming conventions for gcode files. Chat Transcript: Live chat Bob: who lost connecyion? Toni Ryan: Speaking of more printers – I got nitificatio my M3D Pro shipped today – I will be doing an unboxing video Joe Mike Terranella: @NLTMW It’s nice. good amount of room for all our crap. lol. Slowly getting things out of boxes still How I Do It: @Bob I think we’re all here How I Do ItNice: @Toni Ryan curious to see
Here are a few steps that should help you calibrate your extruder. With 1.75mm Filament you want to use about 90mm per minute. With 3mm filament you want to use 30mm per minute.With 1.75mm Filament you want to use about 90mm per minute. With 3mm filament you want to use 30mm per minute. 1. Mark your filament at 150mm above your extruder. You can use any point of reference as long as it does not change. Something you can always reference again. 2. Using the interface of choice Pronterface, Octoprint, etc.. Send the following codes. A. G92E0 (Resets the extruder) B. G1E100F90 (Use F30 for
Welcome to Fun King 3D (.com)! Fun King 3D is made up of a father (Glenn) and son (Xander) team who do 3D Printing and Electronics projects. We love to learn new things and we love to teach others what we know and what we learn. Most of out content is made for YouTube and it works it way here with the occasional content made for here exclusively. Look around and let us know if there is something you want to see.
If you have a 3D Printer and you are still moving your gcode to it by SD Card, then this video is for you. I have to admit that I initially setup Octoprint (Octopi) just because I thought it sounded really cool to connect a Raspberry Pi to my 3D Printer. This video will walk you through the process of installing it and getting the basic setup done. You are going to need a couple of programs to start: Octopi: https://octopi.octoprint.org/ Win32 Disk Imager: https://sourceforge.net/projects/win32diskimager/ Putty: www.putty.org One of the following 2. (AngryIP for the computer, or Fing for a mobile device.) Angry IP Scanner:
Unboxing our June Maker Box. Zach joined us for this one. It was, umm, fun. Good for some laughs. Watch the outtake at the end too. Maker Box can be found at: https://makerbox.cratejoy.com/refer/Glenn-TQTYLWEM By using the link above to sign up for Maker Box, it helps our channel a little by occasionally getting a free month! (Once you sign up, you can get a referral link too!)
We wanted to give an update on the progress of our Anet A8. This video shows a few things we have printed and we talk about a few tweaks we have done to make the printer better. We promised in the beginning that we would not do any major upgrades until at least the 100 hour mark. We exceeded that to 125 hours. Now we will begin some serious upgrades. Link to buy the Anet A8: http://www.gearbest.com/3d-printers-3d-printer-kits/pp_343643.html?lkid=10743862 (*This is an affiliate link that helps the channel.)